As strongest as steel
Steel

As strongest as steel

JSW TMT Plus steel, a toughened high-strength, high-yield and self-tempered TMT bar routed through METCS process in the Morgan Mill is the strongest, greenest steel in the market.

JSW Steel, a flagship company of $11 billion JSW Group, is a testament to decades of experience and a dynamic culture that have culminated in the company becoming the leading provider of specialised steels in India. JSW Steel has been ranked sixth in world-class steelmaking across the globe by World Steel Dynamics in June 2012. It is a pioneer in the use of innovative technology that keeps it ahead of the curve. Not only does it offer the widest product portfolio in India, but also further leverages its capability to customise offerings to match customer expectations. JSW Steel's wide range of product offerings include - hot rolled, cold rolled, galvanised, galvalume, pre-painted galvanised, pre-painted galvalume, TMT Rebars, wire rods and special steel bars, rounds, blooms and spring steel flats.

JSW's flagship manufacturing facility at Vijayanagar is an institute of steel making technology. At Vijayanagar, the TMT bar mill, supplied by Morgan USA, is one of the largest TMT bar mill in the country with a production capacity of 1 million tons per annum. TMT bars from JSW are branded as 'JSW TMT Plus'.

The plus factor

Most of the TMT bar manufacturers in India produce TMT through crude methods and outsource conversion which results into inferior quality product with higher undesirable impurity of phosphorous and sulphur; whereas, JSW Steel produces TMT bars through primary route at a single-source. JSW's superior and controlled manufacturing process restricts the sulphur and phosphorous impurities to as low as 0.035 per cent each and extremely low tramp elements. This enhances the strength of which leads to lesser consumption of steel in civil constructions. JSW TMT Plus is Toughened high strength HYQST (High Yield Quenched and Self Tempered) TMT bar routed through METCS (Morgan Enhanced Temperature Control System) process in the Morgan mill.

Clean and green steel

JSW TMT Plus is manufactured through a combination of technologically controlled excellent processes. JSW Steel is a primary and integrated producer of steel and the steel produced is inherently pure and clean. Quality control is established at the raw material stage itself and flows right up to the point when dispatches take place. Process route of blast furnace-LD steel making-ladle refining-continuous casting of billets ensures right and desired quality with absence of harmful tramp elements and minimum sulphur and phosphorus. Cast billets are hot rolled in the state-of-the-art rolling mill with world-class automated processes, which ensure uniform dimensions and properties in each bar. Surface finish of each bar is excellent as the mill employs tungsten carbide rolls against conventional rolls.

The company takes extra effort to roll out a green product. It has invested significantly in the Corex technology for making hot metal - the only Indian steel manufacturer to adopt this path and only the third in the world.

The technology replaces expensive coke with medium cost coal. It is the most eco-friendly method of iron making; more importantly, this technology generates gas of high-calorific value which can generate power.

Superior quality product

Latest computer controlled rapid quenching system with metallurgical rationale ensures fine equiaxed ferrite-pearlite microstructure at the core and hard and tempered martensite at the outer surface. This gives the bar excellent combination of superior strength coupled with very high ductility. The process also ensures high yield strength of 530 N/sq mm (minimum) and tensile strength of 610 N/sq mm (minimum) coupled with high ductility of 18 per cent elongation (minimum).

JSW TMT Plus is specially designed for earthquake prone zones and has more resistance to earthquakes and shocks due to combination of higher strength and ductility. Its high UTS/ YS ratio of 1.15 minimum ensures higher energy absorption capacity.

JSW TMT Plus has excellent welding properties due to lower carbon equivalent. It can be easily butt-welded, lap-welded and manual arc welding can also be done quite simply without any pre-heating. It can also be bent in customised shape due to its inherent soft core of ferrite and pearlite; in spite of having very high strength JSW TMT Plus has higher corrosion resistance as compared to ordinary rebars due to its unique and uniform microstructure and absence of residual stresses. It has higher fatigue resistance and resistance to higher temperatures. The rib pattern in JSW TMT Plus is of finest quality leading to best bonding with concrete. JSW TMT Plus strictly adheres to BIS standards and specifications and is a blend of safety and economy.

JSW TMT Plus is available in Fe-500 and Fe-500 D grades in sizes 8 mm to 40 mm in straight form and 8, 10 and 12 mm in coil form as well.

Growing network's first choice

To cater to the emerging need of retail consumers especially in semi-urban and rural India, JSW TMT Plus is available through its innovative distribution network called JSW Shoppe. JSW Shoppe is a unique concept adopted by JSW Steel and all steel products manufactured by the company are available under one roof.

JSW TMT Plus, has been entrusted with some of the most prestigious and ambitious projects which include the metro rail projects at Bengaluru, Chennai, Hyderabad, Delhi and Jaipur; monorail project at Mumbai; International Airports at Delhi, Bengaluru and Mumbai; Wankhede Stadium at Mumbai; Yamuna Expressway; Atomic Power Plant at Kakarapar, Gujarat; and many other reputed power projects, ports, refineries and real estate projects. As a result, in a short span of time, JSW TMT Plus has emerged as the most preferred brand in the industry.

(Communication by the management of the company)

JSW TMT Plus steel, a toughened high-strength, high-yield and self-tempered TMT bar routed through METCS process in the Morgan Mill is the strongest, greenest steel in the market. JSW Steel, a flagship company of $11 billion JSW Group, is a testament to decades of experience and a dynamic culture that have culminated in the company becoming the leading provider of specialised steels in India. JSW Steel has been ranked sixth in world-class steelmaking across the globe by World Steel Dynamics in June 2012. It is a pioneer in the use of innovative technology that keeps it ahead of the curve. Not only does it offer the widest product portfolio in India, but also further leverages its capability to customise offerings to match customer expectations. JSW Steel's wide range of product offerings include - hot rolled, cold rolled, galvanised, galvalume, pre-painted galvanised, pre-painted galvalume, TMT Rebars, wire rods and special steel bars, rounds, blooms and spring steel flats. JSW's flagship manufacturing facility at Vijayanagar is an institute of steel making technology. At Vijayanagar, the TMT bar mill, supplied by Morgan USA, is one of the largest TMT bar mill in the country with a production capacity of 1 million tons per annum. TMT bars from JSW are branded as 'JSW TMT Plus'. The plus factor Most of the TMT bar manufacturers in India produce TMT through crude methods and outsource conversion which results into inferior quality product with higher undesirable impurity of phosphorous and sulphur; whereas, JSW Steel produces TMT bars through primary route at a single-source. JSW's superior and controlled manufacturing process restricts the sulphur and phosphorous impurities to as low as 0.035 per cent each and extremely low tramp elements. This enhances the strength of which leads to lesser consumption of steel in civil constructions. JSW TMT Plus is Toughened high strength HYQST (High Yield Quenched and Self Tempered) TMT bar routed through METCS (Morgan Enhanced Temperature Control System) process in the Morgan mill. Clean and green steel JSW TMT Plus is manufactured through a combination of technologically controlled excellent processes. JSW Steel is a primary and integrated producer of steel and the steel produced is inherently pure and clean. Quality control is established at the raw material stage itself and flows right up to the point when dispatches take place. Process route of blast furnace-LD steel making-ladle refining-continuous casting of billets ensures right and desired quality with absence of harmful tramp elements and minimum sulphur and phosphorus. Cast billets are hot rolled in the state-of-the-art rolling mill with world-class automated processes, which ensure uniform dimensions and properties in each bar. Surface finish of each bar is excellent as the mill employs tungsten carbide rolls against conventional rolls. The company takes extra effort to roll out a green product. It has invested significantly in the Corex technology for making hot metal - the only Indian steel manufacturer to adopt this path and only the third in the world. The technology replaces expensive coke with medium cost coal. It is the most eco-friendly method of iron making; more importantly, this technology generates gas of high-calorific value which can generate power. Superior quality product Latest computer controlled rapid quenching system with metallurgical rationale ensures fine equiaxed ferrite-pearlite microstructure at the core and hard and tempered martensite at the outer surface. This gives the bar excellent combination of superior strength coupled with very high ductility. The process also ensures high yield strength of 530 N/sq mm (minimum) and tensile strength of 610 N/sq mm (minimum) coupled with high ductility of 18 per cent elongation (minimum). JSW TMT Plus is specially designed for earthquake prone zones and has more resistance to earthquakes and shocks due to combination of higher strength and ductility. Its high UTS/ YS ratio of 1.15 minimum ensures higher energy absorption capacity. JSW TMT Plus has excellent welding properties due to lower carbon equivalent. It can be easily butt-welded, lap-welded and manual arc welding can also be done quite simply without any pre-heating. It can also be bent in customised shape due to its inherent soft core of ferrite and pearlite; in spite of having very high strength JSW TMT Plus has higher corrosion resistance as compared to ordinary rebars due to its unique and uniform microstructure and absence of residual stresses. It has higher fatigue resistance and resistance to higher temperatures. The rib pattern in JSW TMT Plus is of finest quality leading to best bonding with concrete. JSW TMT Plus strictly adheres to BIS standards and specifications and is a blend of safety and economy. JSW TMT Plus is available in Fe-500 and Fe-500 D grades in sizes 8 mm to 40 mm in straight form and 8, 10 and 12 mm in coil form as well. Growing network's first choice To cater to the emerging need of retail consumers especially in semi-urban and rural India, JSW TMT Plus is available through its innovative distribution network called JSW Shoppe. JSW Shoppe is a unique concept adopted by JSW Steel and all steel products manufactured by the company are available under one roof. JSW TMT Plus, has been entrusted with some of the most prestigious and ambitious projects which include the metro rail projects at Bengaluru, Chennai, Hyderabad, Delhi and Jaipur; monorail project at Mumbai; International Airports at Delhi, Bengaluru and Mumbai; Wankhede Stadium at Mumbai; Yamuna Expressway; Atomic Power Plant at Kakarapar, Gujarat; and many other reputed power projects, ports, refineries and real estate projects. As a result, in a short span of time, JSW TMT Plus has emerged as the most preferred brand in the industry. (Communication by the management of the company)

Related Stories

Gold Stories

Hi There!

Now get regular updates from CW Magazine on WhatsApp!

Click on link below, message us with a simple hi, and SAVE our number

You will have subscribed to our Construction News on Whatsapp! Enjoy

+91 81086 03000

Join us Telegram