Material Manager
PORTS & SHIPPING

Material Manager

The multi-dimensional column mounted jib crane by Uma Engineering Works can handle  
a wide range of materials.

Handling of materials or equipment in multistorey buildings and industrial plants like boilers, cement plants, refineries, etc is done using tower cranes or hoists. To reach various floors, cantilever platforms must be erected temporarily to unload materials at different elevations. In contrast, a column mounted jib crane takes the columns in the structure to support the jib and hoist assembly with a slewing mechanism.

Multi-dimensional features

Material is hoisted from the ground level away from the structure and as it reaches the floor where the jib hoist is mounted, the load is taken to the floor by slewing the jib to the required extent and lowering the load on it to the floor, as seen from the adjacent pictures. The jib crane is made in a few parts so as to enable a crew of four people to dismantle, carry it to the desired floor and re-erect it in a day. Few of these cranes can be mounted on several floors to operate individually.

Any material such as construction equipment bricks, windows floor tiles, fittings, etc that are to be fitted in any floor can be handled conveniently. In case of boilers, various small plants and materials for each floor, such as gratings, chequered plates, insulations, refractory casings, hand rails, gas cylinders, welding plants, etc can all be conveniently handled. The capacity of the Uma Engineering Works column-mounted jib crane is 500 kg on single fall of rope or 1,000 kg on two falls. The drive is by crane duty motor through an inverter drive, gear box and rope drum. An integral mechanical brake is fitted. The inverter provides multi-speed and soft start and stop functions.

Advantages
  • The jib crane is a safe hoist, portable and smooth operating device.
  • Integral mechanical brake provides fail safe braking.
  • It is erected on the structure using clamps, optimising on the total weight.
  • The slewing arrangement allows loads to be handled on to the floor from outside the building/structure.
  • A unique rope reeling arrangement is provided to wind the rope on to the drum.
  • It can be erected at any level and operated to handle materials to any level below the mounted floor.
  • With a little guidance, the crane can be permanently installed as a service lift for goods in the building.
(Communication by the management of the company)

The multi-dimensional column mounted jib crane by Uma Engineering Works can handle  a wide range of materials.Handling of materials or equipment in multistorey buildings and industrial plants like boilers, cement plants, refineries, etc is done using tower cranes or hoists. To reach various floors, cantilever platforms must be erected temporarily to unload materials at different elevations. In contrast, a column mounted jib crane takes the columns in the structure to support the jib and hoist assembly with a slewing mechanism.Multi-dimensional featuresMaterial is hoisted from the ground level away from the structure and as it reaches the floor where the jib hoist is mounted, the load is taken to the floor by slewing the jib to the required extent and lowering the load on it to the floor, as seen from the adjacent pictures. The jib crane is made in a few parts so as to enable a crew of four people to dismantle, carry it to the desired floor and re-erect it in a day. Few of these cranes can be mounted on several floors to operate individually.Any material such as construction equipment bricks, windows floor tiles, fittings, etc that are to be fitted in any floor can be handled conveniently. In case of boilers, various small plants and materials for each floor, such as gratings, chequered plates, insulations, refractory casings, hand rails, gas cylinders, welding plants, etc can all be conveniently handled. The capacity of the Uma Engineering Works column-mounted jib crane is 500 kg on single fall of rope or 1,000 kg on two falls. The drive is by crane duty motor through an inverter drive, gear box and rope drum. An integral mechanical brake is fitted. The inverter provides multi-speed and soft start and stop functions.AdvantagesThe jib crane is a safe hoist, portable and smooth operating device.Integral mechanical brake provides fail safe braking.It is erected on the structure using clamps, optimising on the total weight.The slewing arrangement allows loads to be handled on to the floor from outside the building/structure.A unique rope reeling arrangement is provided to wind the rope on to the drum.It can be erected at any level and operated to handle materials to any level below the mounted floor.With a little guidance, the crane can be permanently installed as a service lift for goods in the building.(Communication by the management of the company)

Related Stories

Gold Stories

Hi There!

Now get regular updates from CW Magazine on WhatsApp!

Click on link below, message us with a simple hi, and SAVE our number

You will have subscribed to our Construction News on Whatsapp! Enjoy

+91 81086 03000

Join us Telegram