+
Bihar to Install FGD Systems in Thermal Power Plants
POWER & RENEWABLE ENERGY

Bihar to Install FGD Systems in Thermal Power Plants

In response to rising concerns over air pollution caused by thermal power plants, Bihar's environment, forest, and climate change department is accelerating efforts to implement flue gas desulfurization (FGD) systems in six major thermal power units. These systems aim to curb the emission of sulfur dioxide (SO2), a major pollutant, thereby reducing its environmental impact.

The issue was the focal point of a review meeting held on Sunday, chaired by Environment Minister Prem Kumar. The meeting also saw the participation of senior officials, including Bihar State Pollution Control Board (BSPCB) Chairman D K Shukla and Member Secretary Neeraj Narayan. They discussed pollution levels and the operational status of six NTPC units in Bihar, focusing on the progress of installing FGD systems.

“Efforts are underway to install FGD systems in all power plants across the state,” said Minister Prem Kumar, according to a BSPCB press release. The meeting extensively addressed the FGD system’s importance in curbing SO2 emissions.

The meeting also reviewed the findings from a study by CSIR-NEERI, Nagpur, which was later evaluated by NITI Aayog in August. The study raised alarms about the high SO2 levels in emissions from Bihar's thermal power plants and underscored the urgent need for FGD installations. Additionally, IIT-Delhi is conducting another study to assess pollution control measures.

The Union Ministry of Climate Change has mandated the installation of FGD systems in all thermal power plants across India by 2026. However, Bihar is behind schedule in implementing these systems, as pointed out by the Centre for Research on Energy and Clean Air (CREA). The CREA report revealed that Bihar’s six major thermal plants emit approximately 181 kilotonnes of SO2 annually, a figure that is ten times higher than the emissions from burning paddy straw in Punjab and Haryana.

The six thermal plants in Bihar—Barauni Thermal Power Station, Barh Super Thermal Power Plant, Buxar Thermal Power Plant, Kahalgaon Super Thermal Power Station, Kanti Thermal Power Station, and Nabinagar Thermal Power Project—are responsible for these high emissions.

Despite the challenges, the meeting expressed satisfaction with the improvement in the air quality index (AQI) in the state this year compared to the previous year. Officials noted that the high levels of small dust particles like PM2.5 and PM10 had negatively impacted the AQI in the past.

In response to rising concerns over air pollution caused by thermal power plants, Bihar's environment, forest, and climate change department is accelerating efforts to implement flue gas desulfurization (FGD) systems in six major thermal power units. These systems aim to curb the emission of sulfur dioxide (SO2), a major pollutant, thereby reducing its environmental impact. The issue was the focal point of a review meeting held on Sunday, chaired by Environment Minister Prem Kumar. The meeting also saw the participation of senior officials, including Bihar State Pollution Control Board (BSPCB) Chairman D K Shukla and Member Secretary Neeraj Narayan. They discussed pollution levels and the operational status of six NTPC units in Bihar, focusing on the progress of installing FGD systems. “Efforts are underway to install FGD systems in all power plants across the state,” said Minister Prem Kumar, according to a BSPCB press release. The meeting extensively addressed the FGD system’s importance in curbing SO2 emissions. The meeting also reviewed the findings from a study by CSIR-NEERI, Nagpur, which was later evaluated by NITI Aayog in August. The study raised alarms about the high SO2 levels in emissions from Bihar's thermal power plants and underscored the urgent need for FGD installations. Additionally, IIT-Delhi is conducting another study to assess pollution control measures. The Union Ministry of Climate Change has mandated the installation of FGD systems in all thermal power plants across India by 2026. However, Bihar is behind schedule in implementing these systems, as pointed out by the Centre for Research on Energy and Clean Air (CREA). The CREA report revealed that Bihar’s six major thermal plants emit approximately 181 kilotonnes of SO2 annually, a figure that is ten times higher than the emissions from burning paddy straw in Punjab and Haryana. The six thermal plants in Bihar—Barauni Thermal Power Station, Barh Super Thermal Power Plant, Buxar Thermal Power Plant, Kahalgaon Super Thermal Power Station, Kanti Thermal Power Station, and Nabinagar Thermal Power Project—are responsible for these high emissions. Despite the challenges, the meeting expressed satisfaction with the improvement in the air quality index (AQI) in the state this year compared to the previous year. Officials noted that the high levels of small dust particles like PM2.5 and PM10 had negatively impacted the AQI in the past.

Next Story
Infrastructure Urban

APCRDA Approves Rs 9.04 Bn to Upgrade Infrastructure in 29 Amaravati Villages

The Andhra Pradesh Capital Region Development Authority (APCRDA), chaired by Chief Minister N Chandrababu Naidu, has approved Rs 9.04 billion for addressing key infrastructure gaps in 29 villages within Amaravati’s greenfield capital area, announced Municipal Administration Minister P. Narayana at the 51st CRDA meeting.The funds will be used to upgrade critical facilities including roads, drains, drinking water supply, sewerage systems, and street lighting. A detailed assessment revealed a 30 per cent shortfall in water supply, a total absence of sewerage infrastructure, a 40 per cent defici..

Next Story
Infrastructure Transport

Cabinet Approves Phase-1B of Lucknow Metro Rail Project Worth Rs 58.01 Bn

The Union Cabinet, led by Prime Minister Narendra Modi, has approved Phase-1B of the Lucknow Metro Rail Project in Uttar Pradesh. This phase covers an 11.165 km corridor with 12 stations—7 underground and 5 elevated—extending the city’s metro network to 34 km upon completion.Phase-1B targets the dense, historic parts of Lucknow, enhancing connectivity across key commercial, healthcare, tourist, and culinary hubs. Important areas served include Aminabad, Yahiyaganj, Pandeyganj, Chowk, King George’s Medical University, and landmarks like Bara Imambara and Rumi Darwaza.This expansion prom..

Next Story
Infrastructure Transport

Major Upgrades Planned for Tamil Nadu’s National Waterways

Tamil Nadu is poised for significant infrastructure upgrades across its National Waterways (NWs), with a focus on developing jetties, cargo hubs, and cruise tourism circuits, according to the Ministry of Ports, Shipping and Waterways. These projects aim to promote sustainable inland water transport and boost regional economic activity.Key projects include the development of Buckingham Canal (part of NW-4), with jetties planned at the following locations:Mahabalipuram to Ediyur BridgeCooum River near Marina BeachPulicat LakeEnnore Port to ETPS, specifically for cargo operationsOther National Wa..

Advertisement

Subscribe to Our Newsletter

Get daily newsletters around different themes from Construction world.

STAY CONNECTED

Advertisement

Advertisement

Advertisement

Talk to us?