Adani Starts Making India's Longest Wind Turbine Blades
POWER & RENEWABLE ENERGY

Adani Starts Making India's Longest Wind Turbine Blades

Adani Wind has begun manufacturing India's longest onshore wind turbine blades, measuring 91.2 metres, at its integrated facility in Mundra, Gujarat. The development coincides with certification for the company's 5 MW wind turbine platform, clearing the way for serial production.

Adani New Industries (ANIL), a subsidiary of Adani Enterprises, developed the blades for its MWL185-5.0 MW platform. The platform has been certified by WindGuard Certification GmbH, an independent German testing and certification organisation, after prototype testing at its installation site in Mundra.

The turbine has a rotor diameter of 185 metres and a hub height of 140 metres. Its rotor sweeps nearly 26,600 square metres, equivalent to more than three and a half standard football pitches. The larger rotor is intended to capture more wind energy at sites with low and moderate wind speeds, widening the range of locations suitable for commercial wind power generation.

The certification confirms compliance with the internationally recognised IEC 61400 series of standards covering wind turbine design, testing and manufacturing. The platform was developed in partnership with German technology company W2E, or Wind to Energy. Adani Wind said the new blades expand its manufacturing capabilities at Mundra, where it already produces blades measuring 78.6 metres and 80.5 metres.

Adani Wind has three turbine platforms listed under the Ministry of New and Renewable Energy's Approved List of Models and Manufacturers for wind turbines. Its MWL160-5.2 MW platform has surpassed 2 GW of installations at Khavda in Gujarat. The company said orders from independent power producers outside the Adani Group had exceeded 1 GW after recent wins.

The company has manufacturing capacity of 2.25 GW at Mundra and plans to expand it. It also operates a technology centre in Rostock, Germany, and maintains a research and development team in India. Adani Wind said it was the only Indian manufacturer included in BloombergNEF's Global Top 15 turbine manufacturers ranking for 2025.

Adani Wind has begun manufacturing India's longest onshore wind turbine blades, measuring 91.2 metres, at its integrated facility in Mundra, Gujarat. The development coincides with certification for the company's 5 MW wind turbine platform, clearing the way for serial production. Adani New Industries (ANIL), a subsidiary of Adani Enterprises, developed the blades for its MWL185-5.0 MW platform. The platform has been certified by WindGuard Certification GmbH, an independent German testing and certification organisation, after prototype testing at its installation site in Mundra. The turbine has a rotor diameter of 185 metres and a hub height of 140 metres. Its rotor sweeps nearly 26,600 square metres, equivalent to more than three and a half standard football pitches. The larger rotor is intended to capture more wind energy at sites with low and moderate wind speeds, widening the range of locations suitable for commercial wind power generation. The certification confirms compliance with the internationally recognised IEC 61400 series of standards covering wind turbine design, testing and manufacturing. The platform was developed in partnership with German technology company W2E, or Wind to Energy. Adani Wind said the new blades expand its manufacturing capabilities at Mundra, where it already produces blades measuring 78.6 metres and 80.5 metres. Adani Wind has three turbine platforms listed under the Ministry of New and Renewable Energy's Approved List of Models and Manufacturers for wind turbines. Its MWL160-5.2 MW platform has surpassed 2 GW of installations at Khavda in Gujarat. The company said orders from independent power producers outside the Adani Group had exceeded 1 GW after recent wins. The company has manufacturing capacity of 2.25 GW at Mundra and plans to expand it. It also operates a technology centre in Rostock, Germany, and maintains a research and development team in India. Adani Wind said it was the only Indian manufacturer included in BloombergNEF's Global Top 15 turbine manufacturers ranking for 2025.

Related Stories

Gold Stories

Next Story
Infrastructure Urban

Goyal & Co. invests Rs 8.2 bn in Bengaluru's Titanium Tech Park

Goyal & Co. has invested approximately Rs 8.2 billion in Titanium Tech Park, a large-scale commercial development in Bengaluru's Whitefield Technology Corridor. Spread across 25 acres, the project has a total development potential of 5 million sq ft, with global companies Airbus and Caterpillar among its key occupiers.The development is planned in multiple phases, featuring Grade A office infrastructure, modern building systems and integrated employee amenities. Phase 1 comprises two operational G+15 office blocks offering 880,000 sq ft and 622,000 sq ft, respectively. Phase 2 will include..

Next Story
Infrastructure Urban

Tata Motors appoints GAMCO as commercial vehicle distributor in Syria

Tata Motors has signed a distribution agreement with Ghassan Aboud Automotive, appointing its subsidiary, Grand Auto & Machinery Co. (GAMCO), as the official distributor of Tata Motors commercial vehicles in Syria. The partnership aims to strengthen transportation, logistics and construction operations across the country while supporting its economic recovery and reconstruction.Under the agreement, GAMCO will introduce Tata Motors' commercial vehicle portfolio to the Syrian market, including cargo vehicles with capacities ranging from under one tonne to 60 tonnes and passenger transport so..

Next Story
Infrastructure Urban

EUROBOND sales rise 17.15% to Rs 1.52 bn in Q2 FY27

EUROBOND, the flagship brand of Euro Panel Products, reported a 17.15 per cent year-on-year increase in net sales to Rs 1.52 billion for the second quarter ended September 30, 2026. The company also registered a 27 per cent sequential growth in sales, supported by increasing order volumes and demand from the infrastructure and commercial construction sectors.Profit before tax stood at Rs 68.3 million during the quarter, reflecting the company's continued business expansion.The company recorded metal panel sales of 383,324 sq m in Q2 FY27, representing a 22.68 per cent increase compared to 312,..

Advertisement

Subscribe to Our Newsletter

Get daily newsletters around different themes from Construction world.

STAY CONNECTED

Advertisement

SPECIAL OFFER
QR Code