+
Steel Ministry Issues Clarification on Quality Control Order
Steel

Steel Ministry Issues Clarification on Quality Control Order

The Ministry of Steel has issued a clarificatory order dated 13th June 2025 regarding the enforcement of existing Quality Control Orders (QCOs) under the Bureau of Indian Standards (BIS). Although 151 BIS Standards have already been brought under QCOs, with the last such order issued in August 2024, no new QCO has been released since then. The recent order aims to clarify that intermediate materials used in the manufacture of final steel products must also comply with the relevant BIS Standards.

This clarification was deemed necessary to ensure parity between domestic and imported steel products. Indian manufacturers are required to use BIS-compliant intermediate materials, whereas imports of finished steel products have not been subject to the same requirements, creating a competitive disadvantage for domestic producers.

Compliance with BIS Standards for intermediate products is essential to ensure the quality of the final output. For instance, large volumes of coated steel are imported into India, using hot rolled (HR) or cold rolled (CR) coils as base materials. If these base materials are not BIS-compliant, the finished coated steel cannot meet BIS Standards, regardless of the compliance of the coating process itself.

The Ministry also highlighted concerns over the potential influx of substandard steel into the Indian market, driven by excess capacity and declining consumption in some countries. India, being the only large and fast-growing economy, is particularly vulnerable to the dumping of cheap steel. Without strict quality checks on imported intermediate inputs like HR coils, CR coils, or coated steel, the domestic industry could face serious challenges.

However, integrated steel plants that produce both intermediate and final products are not required to obtain separate BIS licences for each stage, as their existing certification covers the entire production process. The Ministry plans to issue further clarifications on this after consulting with BIS.

Concerns about a possible price increase due to this clarification have been dismissed, as India’s steel production capacity stands at 200 million tonnes, sufficient to meet domestic demand.

Globally, many countries have imposed safeguard duties and trade measures—such as sectoral tariffs and Tariff Rate Quotas (TRQs)—to block the entry of cheap steel into their markets. These protective steps further raise the risk of substandard steel being diverted to India. Such imports could harm India’s domestic steel sector, particularly small-scale producers, potentially leading to large-scale job losses.

India remains the only major economy where steel consumption has consistently grown above 12 per cent over the past three years. This growth is attributed to government-led infrastructure projects, private and public sector real estate development, and increased manufacturing of capital goods. To meet this rising demand, India will require steel manufacturing capacity of approximately 300 million tonne by 2030 and 400 million tonne by 2035, necessitating a capital investment of nearly $200 billion. The influx of substandard steel could severely undermine this goal by weakening the financial viability and investment capability of domestic steel producers.

The Ministry of Steel has issued a clarificatory order dated 13th June 2025 regarding the enforcement of existing Quality Control Orders (QCOs) under the Bureau of Indian Standards (BIS). Although 151 BIS Standards have already been brought under QCOs, with the last such order issued in August 2024, no new QCO has been released since then. The recent order aims to clarify that intermediate materials used in the manufacture of final steel products must also comply with the relevant BIS Standards.This clarification was deemed necessary to ensure parity between domestic and imported steel products. Indian manufacturers are required to use BIS-compliant intermediate materials, whereas imports of finished steel products have not been subject to the same requirements, creating a competitive disadvantage for domestic producers.Compliance with BIS Standards for intermediate products is essential to ensure the quality of the final output. For instance, large volumes of coated steel are imported into India, using hot rolled (HR) or cold rolled (CR) coils as base materials. If these base materials are not BIS-compliant, the finished coated steel cannot meet BIS Standards, regardless of the compliance of the coating process itself.The Ministry also highlighted concerns over the potential influx of substandard steel into the Indian market, driven by excess capacity and declining consumption in some countries. India, being the only large and fast-growing economy, is particularly vulnerable to the dumping of cheap steel. Without strict quality checks on imported intermediate inputs like HR coils, CR coils, or coated steel, the domestic industry could face serious challenges.However, integrated steel plants that produce both intermediate and final products are not required to obtain separate BIS licences for each stage, as their existing certification covers the entire production process. The Ministry plans to issue further clarifications on this after consulting with BIS.Concerns about a possible price increase due to this clarification have been dismissed, as India’s steel production capacity stands at 200 million tonnes, sufficient to meet domestic demand.Globally, many countries have imposed safeguard duties and trade measures—such as sectoral tariffs and Tariff Rate Quotas (TRQs)—to block the entry of cheap steel into their markets. These protective steps further raise the risk of substandard steel being diverted to India. Such imports could harm India’s domestic steel sector, particularly small-scale producers, potentially leading to large-scale job losses.India remains the only major economy where steel consumption has consistently grown above 12 per cent over the past three years. This growth is attributed to government-led infrastructure projects, private and public sector real estate development, and increased manufacturing of capital goods. To meet this rising demand, India will require steel manufacturing capacity of approximately 300 million tonne by 2030 and 400 million tonne by 2035, necessitating a capital investment of nearly $200 billion. The influx of substandard steel could severely undermine this goal by weakening the financial viability and investment capability of domestic steel producers.

Next Story
Infrastructure Urban

Naidu Seeks Rs 563 Crore For AP Sports Infrastructure

Andhra Pradesh Chief Minister N Chandrababu Naidu has sought Rs 563 crore from the Centre to boost sports infrastructure in the state, including Rs 538 crore for stadium development and Rs 25 crore to host the Khelo India Martial Arts Games 2025. Naidu made the request during a meeting with Union Youth Services and Sports Minister Mansukh Mandaviya in New Delhi on Wednesday.The CM urged early completion of Khelo India infrastructure projects in Tirupati, Rajahmundry, Kakinada, and Narasaraopeta, and called for an international-standard badminton training centre and a national aquatic sports hu..

Next Story
Infrastructure Transport

Tough Bidding Norms Slow NHAI Road Project Awards

Stringent bidding rules imposed by the Ministry of Road Transport & Highways (MoRTH) have led to a slowdown in project awards by the National Highways Authority of India (NHAI), despite a robust Rs 3.5 trillion pipeline. According to an HDFC Securities report, the shift to more cautious developer models now favours firms with strong balance sheets, as tighter qualification norms limit aggressive bidders.The revised norms mandate additional performance security, targeting the exclusion of players that previously submitted low bids—often 25 to 40 per cent below NHAI cost estimates—raisin..

Next Story
Infrastructure Transport

Mumbai Gets Coastal Nod for Next Promenade Phase

As Mumbai prepares to open two major sections of its expansive seafront promenade this week, the city’s civic authority has secured a key coastal clearance to advance further construction. The Maharashtra Coastal Zone Management Authority (MCZMA) has approved the commencement of work on the segment between Haji Ali and Baroda Palace, with tendering expected soon after project cost assessments.The promenade, stretching 7.5 km in length and 20 metres wide, is being designed as a flagship open space for walkers, joggers, and cyclists. Two critical stretches—2.75 km from Tata Garden to Haji Al..

Advertisement

Subscribe to Our Newsletter

Get daily newsletters around different themes from Construction world.

STAY CONNECTED

Advertisement

Advertisement

Advertisement

Talk to us?