Road Ministry to use plastic for NH construction
ROADS & HIGHWAYS

Road Ministry to use plastic for NH construction

The Ministry of Road Transport & Highways (MORTH) is encouraging the use of waste plastic in highway construction, especially on National Highways (NH) within a 50-km periphery of urban areas with a population of 0.5 million or more. A stretch of road has recently been constructed using waste pl...

The Ministry of Road Transport & Highways (MORTH) is encouraging the use of waste plastic in highway construction, especially on National Highways (NH) within a 50-km periphery of urban areas with a population of 0.5 million or more. A stretch of road has recently been constructed using waste plastic on NH-48 near Dhaula Kuan. Portions of the Delhi-Meerut expressway and Gurugram-Sohna road have also been planned for construction using plastic waste. In fact, plastic waste has already been used in wearing courses of NH construction on a pilot basis in Tamil Nadu and Kerala. The technology used is in compliance with the guidelines of Indian Roads Congress (IRC) for the use of waste plastic in hot bituminous mixes in wearing courses. Construction of 1 km of a four-lane highway can help dispose about 7 tonne of waste plastic. On the preparation of the guidelines being used as a framework for the construction of the highways, SK Nirmal, Secretary-General, IRC, says, “IRC prepared ‘Guidelines for the Use of Waste Plastic in Hot Bituminous Mixes (Dry Process) in Wearing Courses (IRC:SP:98)’ in 2013. The document was an outcome of a number of successful pilot projects completed in Tamil Nadu, Karnataka and Delhi. The same was also corroborated in a MoRTH-sponsored research scheme (R-85). After the publication of the IRC document, many road projects using waste plastic have been completed under PMGSY. MoRTH had also issued ‘Guidelines for Use of Waste Plastic in Bituminous Wearing Courses’ within 50-km periphery of an urban area, having a population of more than 5 lakh. The document envisages the use of waste plastic at 6-8 per cent of the weight of the bitumen depending on the climatic conditions of high or low rainfall areas. This should address some of the problems of safe and meaningful disposal of waste plastic, which is otherwise a serious environmental problem.” Additionally, the ministry has mobilised nearly 26,000 people across the country to spread awareness on plastic waste management. Over 61,000 hours of shramdaan have been given to collect plastic waste, resulting in the collection of nearly 18,000 kg of waste plastic throughout the country. Under its ‘Swachhta Hi Sewa’ initiative, the Government of India has launched an awareness drive to curb the use of plastic by discouraging the use of plastic water bottles, installing dustbins for collection of segregated waste, and distributing cloth and jute bags.

Next Story
Infrastructure Transport

Madhya Pradesh Launches PM Shri Tourism Helicopter Service

Madhya Pradesh has achieved a national first by launching the PM Shri Tourism Helicopter Service, establishing India’s first intra-state air connectivity. Chief Minister Dr Mohan Yadav inaugurated the service at Raja Bhoj International Airport, Bhopal, marking a significant step towards transforming the state’s tourism infrastructure. Following the launch, four helicopters departed for Ujjain, symbolising the start of regional air tourism. The initiative, led by the Madhya Pradesh Tourism Board, will operate under a Public-Private Partnership (PPP) model, connecting the state’s key reli..

Next Story
Technology

Garuda Aerospace CEO Honoured by Tamil Nadu Governor

Chennai, 3 November 2025: Agnishwar Jayaprakash, Founder and Chief Executive Officer of Garuda Aerospace, was felicitated by Tamil Nadu Governor Thiru R.N. Ravi for his exceptional contribution to India’s drone technology ecosystem. The recognition was presented during the Foundation Day celebrations of several States and Union Territories at Bharathiar Mandapam, Raj Bhavan, in Chennai. The honour acknowledges Jayaprakash’s leadership in strengthening the country’s unmanned aerial vehicle (UAV) capabilities and his efforts in harnessing technology for social good. He was also recognised..

Next Story
Infrastructure Urban

Hindustan Zinc’s EcoZen Delivers 75 per cent Lower Carbon Emissions

Udaipur, 3 November 2025: Hindustan Zinc, the world’s largest integrated zinc producer and among the top five global silver producers, has reinforced its sustainability leadership with EcoZen, Asia’s first low-carbon zinc brand. The innovation achieves over 75 per cent lower carbon intensity than conventional zinc, setting new standards in green manufacturing and industrial decarbonisation. Produced using renewable energy and certified under REACH standards, EcoZen helps avoid an estimated 400 kg of carbon emissions for every tonne of steel galvanised. It supports India’s Viksit Bharat ..

Advertisement

Subscribe to Our Newsletter

Get daily newsletters around different themes from Construction world.

STAY CONNECTED

Advertisement

Advertisement

Advertisement