Ambuja Cements posts record Q2, lifts FY28 capacity target
Cement

Ambuja Cements posts record Q2, lifts FY28 capacity target

Ahmedabad, recently — Ambuja Cements, part of the Adani Portfolio, reported a strong Q2 FY26 performance with consolidated PAT of Rs 23.02 billion (up 364 per cent year on year), highest-ever Q2 sales volume of 16.6 million tonnes (up 20 per cent) and revenue of Rs 91.74 billion (up 21 per cent). EBITDA rose to Rs 17.61 billion with a margin of 19.2 per cent, while EBITDA per tonne reached Rs 1,060 (up 32 per cent). EPS stood at Rs 7.2 (up 267 per cent). The PAT figure includes an income-tax provision reversal of Rs 16.97 billion.
The company raised its FY28 capacity goal by 15 MTPA to 155 MTPA, largely through low-capex debottlenecking at about USD 48 per tonne. Thirteen new blenders are being installed to optimise product mix and lift the share of premium cement, and logistics debottlenecking is expected to add around three per cent utilisation to the existing 107 MTPA base over 24 months.
On projects, a 4 MTPA kiln at Bhatapara has begun trial runs, the 2 MTPA Krishnapatnam grinding unit has been operationalised, and an additional 7 MTPA across three locations is slated for Q3. Renewable power capacity reached 673 MW after commissioning 200 MW, with targets of 900 MW by year-end and 1,122 MW by FY27.
Cost discipline continued: kiln fuel, power and logistics costs declined year on year; green power share of consumption rose to 32.9 per cent; and logistics cost stood at Rs 1,224 per tonne. Management reiterated end-FY26 total cost guidance of about Rs 4,000 per tonne and a pathway to Rs 3,650 per tonne by FY28, supported by higher coal share, newer assets, shorter lead distances (including a growing sea-logistics share), and long-term fly ash/slag tie-ups.
Strategically, Ambuja launched CiNOC (Cement Intelligent Network Operations Centre) to embed AI across sales, production and logistics; deepened engagements with CONCOR, CREDAI and 400+ academic partners; and ordered seven vessels totalling 65,800 DWT to lift coastal movement to five per cent. The company remains debt-free with net worth of Rs 694.93 billion and the highest Crisil ratings (AAA/Stable; A1+).

Ahmedabad, recently — Ambuja Cements, part of the Adani Portfolio, reported a strong Q2 FY26 performance with consolidated PAT of Rs 23.02 billion (up 364 per cent year on year), highest-ever Q2 sales volume of 16.6 million tonnes (up 20 per cent) and revenue of Rs 91.74 billion (up 21 per cent). EBITDA rose to Rs 17.61 billion with a margin of 19.2 per cent, while EBITDA per tonne reached Rs 1,060 (up 32 per cent). EPS stood at Rs 7.2 (up 267 per cent). The PAT figure includes an income-tax provision reversal of Rs 16.97 billion.The company raised its FY28 capacity goal by 15 MTPA to 155 MTPA, largely through low-capex debottlenecking at about USD 48 per tonne. Thirteen new blenders are being installed to optimise product mix and lift the share of premium cement, and logistics debottlenecking is expected to add around three per cent utilisation to the existing 107 MTPA base over 24 months.On projects, a 4 MTPA kiln at Bhatapara has begun trial runs, the 2 MTPA Krishnapatnam grinding unit has been operationalised, and an additional 7 MTPA across three locations is slated for Q3. Renewable power capacity reached 673 MW after commissioning 200 MW, with targets of 900 MW by year-end and 1,122 MW by FY27.Cost discipline continued: kiln fuel, power and logistics costs declined year on year; green power share of consumption rose to 32.9 per cent; and logistics cost stood at Rs 1,224 per tonne. Management reiterated end-FY26 total cost guidance of about Rs 4,000 per tonne and a pathway to Rs 3,650 per tonne by FY28, supported by higher coal share, newer assets, shorter lead distances (including a growing sea-logistics share), and long-term fly ash/slag tie-ups.Strategically, Ambuja launched CiNOC (Cement Intelligent Network Operations Centre) to embed AI across sales, production and logistics; deepened engagements with CONCOR, CREDAI and 400+ academic partners; and ordered seven vessels totalling 65,800 DWT to lift coastal movement to five per cent. The company remains debt-free with net worth of Rs 694.93 billion and the highest Crisil ratings (AAA/Stable; A1+).

Next Story
Infrastructure Urban

The Engineers’ Bill must be cleared on priority

Amid sweeping changes in the global construction industry, India must urgently overhaul its approach to procurement, regulation and the training of engineers, says Prashant Kapila, President, Consulting Engineers Association of India (CEAI), an industry body. Holding a master’s degree in civil & environmental Engineering from Carnegie Mellon University, US, he tells CW that the early passage of the Professional Engineers’ Bill, 2025, is critical to this transformation.At a time when the construction sector is at an inflexion point, what do you see as the key challenges fo..

Next Story
Infrastructure Urban

Yashoda Medicity

A 1,200-bed healthcare centre rises in Ghaziabad, marrying clinical efficiency, human-centred design and sustainability.In the rapidly expanding urban fabric of Ghaziabad, the demand for advanced tertiary healthcare infrastructure has long outpaced supply. Yashoda Medicity – a 1,200-bed, multi-speciality campus located in Indirapuram – represents a decisive response to this gap. Planned as a next-generation, LEED-ready, digitally enabled healthcare ecosystem, the project combines architectural clarity, engineering precision and strong sustainability benchmarks to deliver a contemporary med..

Next Story
Technology

We’re fixing construction from the ground up!

In an incisive conversation with CW, Iesh Dixit, CEO & Cofounder, Powerplay, unpacks how the platform is reshaping onsite execution, unlocking real-time visibility and redefining digital adoption across India’s construction sites.When Powerplay began digitising site-to-office workflows, which onsite challenges did you prioritise first, and what informed those choices?From the start, we were very clear on one thing: digitisation in construction can’t begin in the office. It has to begin onsite, with the people actually executing the work. So, the first problems we went after w..

Advertisement

Subscribe to Our Newsletter

Get daily newsletters around different themes from Construction world.

STAY CONNECTED

Advertisement

Advertisement

Advertisement

Advertisement

Open In App