Thermal power capacity addition slows 32% amid project delays
POWER & RENEWABLE ENERGY

Thermal power capacity addition slows 32% amid project delays

India's thermal power generation capacity expansion has decelerated significantly in the first 11 months of FY25, witnessing a 32% drop compared to the same period last year.

Provisional data from the Central Electricity Authority (CEA) indicates that only 3.9 GW of thermal capacity was added up to February 2025, down from 5.7 GW in the same period of FY24.

Thermal power plants—predominantly coal-fired, with some based on gas and diesel—remain the backbone of India’s energy mix. The decline in capacity additions has been largely attributed to delays in project commissioning, land acquisition issues, and material supply bottlenecks.

“In several projects, the majority of the work has been completed, but last-mile execution delays—caused by issues with contractors, equipment availability, land acquisition and right of way—have led to the deferment of commissioning,” explained Vikram V, Vice President and Co-Group Head – Corporate Ratings, ICRA Ltd.

In February 2025 alone, only 1.32 GW was added, less than half of the 2.78 GW added in the same month the previous year, and below the month’s target of 1.46 GW.

This dip comes despite the government’s roadmap to add approximately 80 GW of new coal-based power capacity by 2032, aimed at addressing India’s rising energy needs.

Growing energy requirement India's energy demand continues to surge, with peak power consumption touching new highs over the past three years. This summer, peak demand is projected to reach 270 GW—exceeding the 250 GW record set in May 2024.

Between April and February of FY25, India generated 1.67 trillion units of electricity, marking a 5% year-on-year rise from 1.59 trillion units. The increase has spurred greater output across both fossil-fuel and renewable sources.

Although India aims to source 50% of its installed power capacity from non-fossil fuels by 2030, coal-based generation will continue to play a pivotal role in ensuring baseload supply.

As of now, thermal power constitutes 52.6% of India’s total installed capacity. The CEA projects this share will decline to 42.6% by FY27 and to 31.6% by FY32. Of the total 247.59 GW thermal capacity, coal and lignite comprise 221.81 GW, gas-based 25.18 GW, and diesel-backed 589 MW.

In November 2023, the government reaffirmed its plan to install 80 GW of new thermal capacity, estimating a requirement of 283 GW of coal and lignite-based generation by FY32 to meet projected electricity demand.

India's thermal power generation capacity expansion has decelerated significantly in the first 11 months of FY25, witnessing a 32% drop compared to the same period last year. Provisional data from the Central Electricity Authority (CEA) indicates that only 3.9 GW of thermal capacity was added up to February 2025, down from 5.7 GW in the same period of FY24. Thermal power plants—predominantly coal-fired, with some based on gas and diesel—remain the backbone of India’s energy mix. The decline in capacity additions has been largely attributed to delays in project commissioning, land acquisition issues, and material supply bottlenecks. “In several projects, the majority of the work has been completed, but last-mile execution delays—caused by issues with contractors, equipment availability, land acquisition and right of way—have led to the deferment of commissioning,” explained Vikram V, Vice President and Co-Group Head – Corporate Ratings, ICRA Ltd. In February 2025 alone, only 1.32 GW was added, less than half of the 2.78 GW added in the same month the previous year, and below the month’s target of 1.46 GW. This dip comes despite the government’s roadmap to add approximately 80 GW of new coal-based power capacity by 2032, aimed at addressing India’s rising energy needs. Growing energy requirement India's energy demand continues to surge, with peak power consumption touching new highs over the past three years. This summer, peak demand is projected to reach 270 GW—exceeding the 250 GW record set in May 2024. Between April and February of FY25, India generated 1.67 trillion units of electricity, marking a 5% year-on-year rise from 1.59 trillion units. The increase has spurred greater output across both fossil-fuel and renewable sources. Although India aims to source 50% of its installed power capacity from non-fossil fuels by 2030, coal-based generation will continue to play a pivotal role in ensuring baseload supply. As of now, thermal power constitutes 52.6% of India’s total installed capacity. The CEA projects this share will decline to 42.6% by FY27 and to 31.6% by FY32. Of the total 247.59 GW thermal capacity, coal and lignite comprise 221.81 GW, gas-based 25.18 GW, and diesel-backed 589 MW. In November 2023, the government reaffirmed its plan to install 80 GW of new thermal capacity, estimating a requirement of 283 GW of coal and lignite-based generation by FY32 to meet projected electricity demand.

Next Story
Infrastructure Transport

India’s Maha Kumbh of Road Construction

The RAHSTA Forum 2025, held on June 25 at Courtyard by Marriott, Mumbai, delivered powerful insights and dialogue on the future of India’s roads and highways sector. Organised by the FIRST Construction Council, the Forum served as the curtain-raiser to the much-anticipated RAHSTA Expo 2025, set to take place on 3rd and 4th September at the Jio Convention Centre, Mumbai.Union Minister of Roads Transport & Highways Shri Nitin Gadkari, while appreciating the efforts of FIRST Construction Council and ASAPP Info Global Group, commended the awards which recognise excellence across various..

Next Story
Real Estate

Built to Last, Designed to Impress

The construction and interior design industries stand at the confluence of functionality and aesthetics, where innovation powers the creation of enduring structures and inspiring spaces. At the heart of this process are materials and solutions that enable architects, designers, and builders to realise their visions with precision and reliability.Featuring iconic brands such as Fevicol—synonymous with adhesive solutions—Dr. Fixit, a complete waterproofing system renowned for addressing every critical area of construction, and Roff, a specialist in tile-fixing solutions, Pidilite has earned ..

Next Story
Infrastructure Energy

New Push to Cut India’s Air Pollution through Power Sector Reforms

In a significant stride toward environmental sustainability, Cummins India introduced CPCB IV+ compliant gensets to India on July 5, 2023, marking a paradigm shift in the power generation industry. These generators are engineered to adhere to the progressive emission norms set by the Ministry of Environment, Forest, and Climate Change. Being the first sets in the field, they have garnered praise for their remarkable achievements in emissions reduction and cutting-edge technology. Powerica, with its four-decade-long partnership with Cummins India Limited, is dedicated to consistently deliver th..

Advertisement

Advertisement

Subscribe to Our Newsletter

Get daily newsletters around different themes from Construction world.

STAY CONNECTED

Advertisement

Advertisement

Advertisement

Advertisement

Talk to us?