Mysore compound wall built using construction debris
WATER & WASTE

Mysore compound wall built using construction debris

Founder, Regional Low Energy Environment Friendly (RLEEF), Rajesh Kumar Jain has built the compound wall of the SWM unit of MCC with the help of construction debris. The MCC is located near Jodi Tengina Mara, Bannimantap.

The Mysuru city corporation leads the way in addressing the challenges that come along with the construction debris management after the city had been dropped to a lower position (12) in the recent Swachh Survekshan Survey.

The Mysuru City Corporation is successful in building a compound wall with the help of construction debris at the unit of solid waste management set up in the burial ground located near Jodi Tengina Mara, Bannimantap Highway Circle.

Approximately 50% of the construction and demolition waste was reused by the civic bodies for the construction of the compound wall. The existing compound wall had been constructed many years ago and was in a bad condition. Therefore, the corporation authorities approached the Public Works Department (PWD) for providing an approximate cost for the compound wall construction. Upon the request, an estimated cost of Rs 4 lakh was made by the PWD authorities.

Meanwhile, the founder of Regional Low Energy Environment Friendly (RLEEF) Rajesh Kumar Jain was approached by the MCC environmental engineer, Sridevi. The RLEEF had already built structures utilizing construction debris for a sustainable as well as zero waste wall. And he agreed.

The wall is 100 feet long and 10 feet tall that was built by the 10 loads of construction debris given by the MCC. The wall has been constructed at a minimum cost of Rs 2 lakh.

Image Source

Founder, Regional Low Energy Environment Friendly (RLEEF), Rajesh Kumar Jain has built the compound wall of the SWM unit of MCC with the help of construction debris. The MCC is located near Jodi Tengina Mara, Bannimantap. The Mysuru city corporation leads the way in addressing the challenges that come along with the construction debris management after the city had been dropped to a lower position (12) in the recent Swachh Survekshan Survey. The Mysuru City Corporation is successful in building a compound wall with the help of construction debris at the unit of solid waste management set up in the burial ground located near Jodi Tengina Mara, Bannimantap Highway Circle. Approximately 50% of the construction and demolition waste was reused by the civic bodies for the construction of the compound wall. The existing compound wall had been constructed many years ago and was in a bad condition. Therefore, the corporation authorities approached the Public Works Department (PWD) for providing an approximate cost for the compound wall construction. Upon the request, an estimated cost of Rs 4 lakh was made by the PWD authorities. Meanwhile, the founder of Regional Low Energy Environment Friendly (RLEEF) Rajesh Kumar Jain was approached by the MCC environmental engineer, Sridevi. The RLEEF had already built structures utilizing construction debris for a sustainable as well as zero waste wall. And he agreed. The wall is 100 feet long and 10 feet tall that was built by the 10 loads of construction debris given by the MCC. The wall has been constructed at a minimum cost of Rs 2 lakh. Image Source

Next Story
Resources

Anant Raj Appoints Anish Sarin as Director

Anant Raj has appointed Anish Sarin as Director on its Board, marking a key step in the company’s leadership transition and long-term growth strategy. The announcement was made during the company’s Q4 and FY26 results declaration, reflecting the induction of next-generation leadership as the company expands across real estate, cloud infrastructure and data centre businesses. Anish Sarin, grandson of veteran industrialist Ashok Sarin, represents the emerging leadership at Anant Raj. Educated at Regent’s University London, he brings a global business outlook along with a strong focus on t..

Next Story
Technology

Vedanta eyes AI-led value growth

Vedanta Group expects to unlock USD 300–400 million in additional value over the next three years through large-scale deployment of AI-led industrial technologies across its businesses. The group said its V-Spark DeepTech Ventures platform has already delivered nearly four times return on investment since inception.Vedanta is scaling AI, predictive analytics, Industrial Internet of Things, digital twins, machine learning, automation and connected manufacturing technologies across its metals, mining, energy and industrial operations. These deployments are aimed at improving productivity, lowe..

Next Story
Infrastructure Urban

Hindustan Zinc inks pact with Group Nirmal

Hindustan Zinc has signed an MoU with Group Nirmal to set up a zinc wire manufacturing facility at its Zinc Industrial Park in Khankhala, Bhilwara district, Rajasthan. The partnership will expand downstream manufacturing activity and support value-added zinc applications in India.Under the agreement, Group Nirmal will manufacture zinc wire products using Hindustan Zinc’s Special High Grade zinc. The products will cater to infrastructure, renewable energy, automotive and industrial engineering sectors.Zinc wire is used in thermal spray coating and metallising processes to protect steel struct..

Advertisement

Subscribe to Our Newsletter

Get daily newsletters around different themes from Construction world.

STAY CONNECTED

Advertisement

Advertisement

Advertisement