+
Tamil Nadu Plans Pennaiyar-Cheyyar Link to Boost Irrigation
WATER & WASTE

Tamil Nadu Plans Pennaiyar-Cheyyar Link to Boost Irrigation

The Tamil Nadu government is advancing plans to interlink the Pennaiyar and Cheyyar rivers to improve irrigation for the Nandan canal system and support agricultural activities across approximately 9,000 acres in the Villupuram and Tiruvannamalai districts.

The State Water Resources Department (WRD) has submitted a detailed project report (DPR) for Phase I of the scheme, with an estimated cost of Rs 3.9 billion. The proposal involves the excavation of a 12.45-kilometre main canal and a 16.55-kilometre feeder canal, drawing water from the foreshore of the Sathanur Reservoir to the Keeranur Dam via Samuthiram Lake and the Olaiyar.

The scheme is expected to benefit 2,609 acres across 22 tanks in Tiruvannamalai district and 6,653 acres across 36 tanks in both Villupuram and Tiruvannamalai. Initially proposed in 2021, the plan was put on hold due to lack of funding, but was revived following Chief Minister M. K. Stalin’s announcement during a government event in Villupuram earlier this year.

The WRD revised and submitted the DPR in February 2025 after analysing 35 years of flood and rainfall data in the Sathanur Reservoir catchment. The current plan proposes the diversion of 0.475 tmc (thousand million cubic feet) of surplus water—out of 0.76 tmc available—to Samuthiram Lake by gravity. From there, the water will flow to Keeranur Dam via Oolaiyar and Thirunalaru.

To implement the project, the government will need to acquire 345 acres of land, including 276 acres of patta land, 35 acres of poramboke land, and 34 acres of forest land. “We are optimistic about receiving approval for land acquisition soon, followed by administrative clearance, as the project will benefit 67 villages across the two districts,” a WRD official stated.

The second phase of the scheme proposes a connection to the Nandan canal from the left sluice of Keeranur Dam. However, this would require an estimated 5.8 tmc of surplus water. Although the dependability is just 35 per cent, the second phase aims to harness excess flows during heavy rainfall or cloudbursts. The Pennaiyar, which receives substantial inflows every three to five years, would also benefit from flood mitigation through this extended linkage.

The Tamil Nadu government is advancing plans to interlink the Pennaiyar and Cheyyar rivers to improve irrigation for the Nandan canal system and support agricultural activities across approximately 9,000 acres in the Villupuram and Tiruvannamalai districts.The State Water Resources Department (WRD) has submitted a detailed project report (DPR) for Phase I of the scheme, with an estimated cost of Rs 3.9 billion. The proposal involves the excavation of a 12.45-kilometre main canal and a 16.55-kilometre feeder canal, drawing water from the foreshore of the Sathanur Reservoir to the Keeranur Dam via Samuthiram Lake and the Olaiyar.The scheme is expected to benefit 2,609 acres across 22 tanks in Tiruvannamalai district and 6,653 acres across 36 tanks in both Villupuram and Tiruvannamalai. Initially proposed in 2021, the plan was put on hold due to lack of funding, but was revived following Chief Minister M. K. Stalin’s announcement during a government event in Villupuram earlier this year.The WRD revised and submitted the DPR in February 2025 after analysing 35 years of flood and rainfall data in the Sathanur Reservoir catchment. The current plan proposes the diversion of 0.475 tmc (thousand million cubic feet) of surplus water—out of 0.76 tmc available—to Samuthiram Lake by gravity. From there, the water will flow to Keeranur Dam via Oolaiyar and Thirunalaru.To implement the project, the government will need to acquire 345 acres of land, including 276 acres of patta land, 35 acres of poramboke land, and 34 acres of forest land. “We are optimistic about receiving approval for land acquisition soon, followed by administrative clearance, as the project will benefit 67 villages across the two districts,” a WRD official stated.The second phase of the scheme proposes a connection to the Nandan canal from the left sluice of Keeranur Dam. However, this would require an estimated 5.8 tmc of surplus water. Although the dependability is just 35 per cent, the second phase aims to harness excess flows during heavy rainfall or cloudbursts. The Pennaiyar, which receives substantial inflows every three to five years, would also benefit from flood mitigation through this extended linkage.

Related Stories

Gold Stories

Next Story
Infrastructure Urban

KONE Opens India's First Digital Experience Centre in Pune

KONE, a global elevator and escalator manufacturer, has inaugurated its first Digital Experience Centre (DEC) in India, located in Pune. The facility aims to showcase how artificial intelligence (AI), connectivity and data-driven technologies can enhance customer experiences and improve building operations.The centre was inaugurated by Jussi Herlin, Executive Vice Chair, KONE Corporation; Philippe Delorme, President and CEO, KONE; and Nandan Nilekani, Co-founder and Chairman of the Board, Infosys.Designed as an interactive customer environment, the facility demonstrates digital solutions cover..

Next Story
Infrastructure Urban

CII GreenCo Launches Circularity Guidelines for Indian Industry

The Confederation of Indian Industry (CII) GreenCo Council has launched the CII GreenCo Circularity Guidelines – Pilot Version at the 17th CII GreenCo Waste & Resource Management Summit 2026 in Chennai. The initiative aims to strengthen resource efficiency, waste reduction and circular economy practices across Indian manufacturing and process industries.The guidelines introduce a structured framework with circularity indices covering raw materials, consumables, packaging and other resource inputs. These indicators will help industries assess existing practices, identify opportunities to ..

Next Story
Infrastructure Energy

Global Electronics Association Launches IPC-1783-CO2E Standard

The Global Electronics Association has introduced IPC-1783-CO2E, a new international standard aimed at improving consistency, transparency and comparability in product carbon footprint reporting across the electronics manufacturing industry.The standard, titled International Standard for Data Collection and Reporting of CO2 Equivalent (CO2e) Emissions for the Electronics Manufacturing Supply Chain, provides industry-specific guidance for collecting, estimating and reporting carbon emissions data.With increasing regulatory requirements and customer expectations, electronics manufacturers face c..

Advertisement

Subscribe to Our Newsletter

Get daily newsletters around different themes from Construction world.

STAY CONNECTED

Advertisement

SPECIAL OFFER
QR Code