Centre Moves To Class Nuclear Power As Clean Energy
POWER & RENEWABLE ENERGY

Centre Moves To Class Nuclear Power As Clean Energy

The Union government has begun a policy exercise to formally integrate nuclear power into India’s clean energy framework after Parliament cleared the SHANTI (Atomic Energy) Bill, officials familiar with the matter said. While nuclear energy is recognised as a non-fossil, low-carbon source of electricity, it is not currently treated on par with renewable energy in India’s power-sector regulations.

Officials said the ongoing review aims to bridge this gap by aligning nuclear power more closely with other clean electricity sources within regulatory and market mechanisms, rather than announcing stand-alone fiscal incentives at this stage. An official from the Ministry of Power said the effort is focused on regulatory alignment to enable smoother integration of nuclear power into long-term power planning.

The move follows Parliament’s approval of the SHANTI Bill, which provides the legislative foundation for expanding nuclear capacity by permitting greater private sector participation in the construction and operation of nuclear power plants under a licensing regime, while retaining central control over nuclear fuel, safety regulation and strategic assets. The legislation seeks to address structural constraints that have slowed capacity additions, as India targets 100 GW of nuclear power by 2047.

A key proposal under consideration is whether nuclear power should be made eligible under Renewable Purchase Obligations. RPOs mandate power distribution companies and large commercial and industrial consumers to source a fixed share of electricity from clean energy. At present, nuclear power does not qualify, despite its low-carbon profile. Officials said inclusion under RPOs could improve long-term demand visibility for nuclear projects, which involve high upfront costs and long construction timelines.

The government is also reviewing the environmental classification of nuclear power plants under norms set by the Central Pollution Control Board. Nuclear plants are currently placed in the “Red” category, reserved for highly polluting activities, largely due to the handling of radioactive materials. Officials said the review is assessing whether this classification reflects the actual pollution profile of nuclear plants, which do not emit carbon dioxide or conventional air pollutants during operation.

Any change, officials stressed, would be limited to environmental categorisation and would not dilute radiation safety, waste management or oversight by nuclear regulators. The objective is to make the regulatory framework more enabling and reduce avoidable delays, while maintaining strict safety standards.

India’s net-zero commitment for 2070 requires a rapid expansion of clean electricity to meet rising demand from industry, urbanisation and electrification. While solar and wind are expected to dominate capacity additions, their intermittency limits round-the-clock supply. Nuclear power, with its ability to deliver continuous low-carbon electricity, is seen as important for grid stability as fossil fuel dependence is reduced.

Officials from the Department of Atomic Energy said consultations across ministries and regulators are ongoing, and no timeline has yet been set for decisions on RPO eligibility or environmental reclassification.

The Union government has begun a policy exercise to formally integrate nuclear power into India’s clean energy framework after Parliament cleared the SHANTI (Atomic Energy) Bill, officials familiar with the matter said. While nuclear energy is recognised as a non-fossil, low-carbon source of electricity, it is not currently treated on par with renewable energy in India’s power-sector regulations. Officials said the ongoing review aims to bridge this gap by aligning nuclear power more closely with other clean electricity sources within regulatory and market mechanisms, rather than announcing stand-alone fiscal incentives at this stage. An official from the Ministry of Power said the effort is focused on regulatory alignment to enable smoother integration of nuclear power into long-term power planning. The move follows Parliament’s approval of the SHANTI Bill, which provides the legislative foundation for expanding nuclear capacity by permitting greater private sector participation in the construction and operation of nuclear power plants under a licensing regime, while retaining central control over nuclear fuel, safety regulation and strategic assets. The legislation seeks to address structural constraints that have slowed capacity additions, as India targets 100 GW of nuclear power by 2047. A key proposal under consideration is whether nuclear power should be made eligible under Renewable Purchase Obligations. RPOs mandate power distribution companies and large commercial and industrial consumers to source a fixed share of electricity from clean energy. At present, nuclear power does not qualify, despite its low-carbon profile. Officials said inclusion under RPOs could improve long-term demand visibility for nuclear projects, which involve high upfront costs and long construction timelines. The government is also reviewing the environmental classification of nuclear power plants under norms set by the Central Pollution Control Board. Nuclear plants are currently placed in the “Red” category, reserved for highly polluting activities, largely due to the handling of radioactive materials. Officials said the review is assessing whether this classification reflects the actual pollution profile of nuclear plants, which do not emit carbon dioxide or conventional air pollutants during operation. Any change, officials stressed, would be limited to environmental categorisation and would not dilute radiation safety, waste management or oversight by nuclear regulators. The objective is to make the regulatory framework more enabling and reduce avoidable delays, while maintaining strict safety standards. India’s net-zero commitment for 2070 requires a rapid expansion of clean electricity to meet rising demand from industry, urbanisation and electrification. While solar and wind are expected to dominate capacity additions, their intermittency limits round-the-clock supply. Nuclear power, with its ability to deliver continuous low-carbon electricity, is seen as important for grid stability as fossil fuel dependence is reduced. Officials from the Department of Atomic Energy said consultations across ministries and regulators are ongoing, and no timeline has yet been set for decisions on RPO eligibility or environmental reclassification.

Next Story
Real Estate

Hindware Introduces Starc Smart Wall Mount Toilet

Hindware has introduced the Starc Smart Wall-Mount Toilet under its Hindware Italian Collection, designed to combine automation, hygiene and contemporary bathroom aesthetics. The model features automatic flushing, sensor-based seat opening and closing, and remote-controlled functions. It also includes an oscillating water spray and warm air dryer for cleaning, along with a self-cleaning nozzle designed to maintain hygiene. Additional features include adjustable heated seating, customisable water temperature and pressure settings, a foot-touch flush system and an LCD control interface. The wa..

Next Story
Equipment

Company showcases North America-certified machinery and secures new deals

Zoomlion Heavy Industry Science & Technology Co., recently showcased a wide portfolio of North America-certified and customised construction equipment at CONEXPO-CON/AGG 2026 in Las Vegas. The display included engineering hoisting machinery, concrete equipment, earthmoving machinery, mining equipment and construction hoisting solutions tailored to regional operational requirements.All equipment presented at the exhibition complies with North American certification standards, with several models specifically developed to meet local regulatory requirements and site conditions. One of the hig..

Next Story
Technology

Sinoboom Launches Dual-ETM Smart Technology

Sinoboom recently introduced its Dual-ETM Smart Technology at CONEXPO-CON/AGG 2026, designed to enhance battery endurance and operational efficiency in electric boom lifts.The new technology integrates advanced components that enable real-time optimisation of power usage during equipment operation. By calculating the precise power requirement instantly, the system delivers only the energy needed for each movement, reducing the inefficiencies associated with conventional maximum-demand power systems.The solution incorporates multiple sensors—including pressure, weight, length and level sensor..

Advertisement

Subscribe to Our Newsletter

Get daily newsletters around different themes from Construction world.

STAY CONNECTED

Advertisement

Advertisement

Advertisement