First to 3D print a Ground plus One, building in India
Cement

First to 3D print a Ground plus One, building in India

Larsen &Toubro, announced having successfully 3D printed a G+1 (Ground plus one) Building with reinforcement for the first time in India. With the country aggressively pursuing the objective of creati...

Larsen &Toubro, announced having successfully 3D printed a G+1 (Ground plus one) Building with reinforcement for the first time in India. With the country aggressively pursuing the objective of creating 60 million houses under the Housing for All by 2022 programme, this achievement will certainly give a huge fillip for the mass housing segment. “3D concrete printing is one of the technology disruptors with the potential to radically redefine construction methodologies and I am extremely happy that by demonstrating our growing expertise in 3D printing, we are well positioned to push the boundaries of automated robotic construction,” said Mr. M V Satish, Whole Time Director & Senior Executive Vice President (Buildings). “3D printing will not only accelerate the pace of construction but also significantly improve build quality,” he added.L&T has 3D printed a Ground + 1 building of 700 sq. feet built up area at their Kanchipuram facility with a special, in-house developed concrete mix using indigenously available regular construction materials. The building was printed with both vertical reinforcement bar and horizontal distributors using welded mesh that satisfy provisions in the Indian Codes and optimize the cost of construction. Except for the horizontal slab members, the entire building structure was 3D printed ‘Cast in Situ’ at the job site in an ‘open to sky’ environment within 106 printing hours, using a fully automated 3D printer. 3D printing is a process, in which the material is printed under computer control to build a 3- dimensional product, typically layer by layer. It is predominantly used in manufacturing industries to print rapid prototypes, complex shapes and small batch production using special polymers, metal alloys etc. 3D printing with concrete is still largely work in progress across the globe. Earlier in November 2019, the team had 3D printed 240 sq. feet 1 BHK, in line with typical EWS building layout, to explore the feasibility of this innovative technology. Background: Larsen &Toubro is an Indian multinational engaged in engineering, procurement and construction projects, manufacturing, defence and services with over USD 21 billion in revenue. It operates in over 30 countries worldwide.

Next Story
Infrastructure Urban

Coal Ministry Achieves Milestones under Special Campaign 5.0

The Ministry of Coal and its Public Sector Undertakings (PSUs) have achieved notable milestones under the Special Campaign 5.0, focusing on cleanliness, operational efficiency, and sustainability across the coal sector. During the implementation phase from 2–31 October 2025, over 1,205 sites were cleaned, covering 68,04,087 sq ft, nearing the target of 82,51,511 sq ft. Scrap disposal of 5,813 MT against a target of 8,678 MT generated Rs 228.7 million in revenue. In addition, 1,11,248 physical and 30,331 electronic files were reviewed, with 74,123 weeded out or closed. Key initiatives showc..

Next Story
Infrastructure Energy

Vesting Orders Issued for Three Coal Blocks under Commercial Auctions

The Ministry of Coal’s Nominated Authority has issued vesting orders for three coal blocks under commercial coal block auctions on 23 October 2025. The Coal Mine Development and Production Agreements (CMDPAs) for these mines were earlier signed on 21 August 2025. The three blocks include Rajgamar Dipside (Deavnara), Tangardihi North, and Mahuagarhi. Of these, two are partially explored while one is fully explored, with a combined peak rated capacity of around 1 MTPA and geological reserves of approximately 1,484.41 million tonnes. These mines are expected to generate annual revenue of abou..

Next Story
Infrastructure Urban

TEC, IIT-Hyderabad Partner to Boost 6G and Telecom Standards

The Telecommunication Engineering Centre (TEC), technical arm of the Department of Telecommunications (DoT), has signed a Memorandum of Understanding (MoU) with the Indian Institute of Technology Hyderabad (IIT Hyderabad) for joint research and technical collaboration in advanced telecom technologies and standardisation. The partnership focuses on developing India-specific standards and test frameworks for next-generation networks, including 6G, Artificial Intelligence (AI), and Non-Terrestrial Networks (NTNs). It also aims to enhance India’s participation in international standardisation f..

Advertisement

Subscribe to Our Newsletter

Get daily newsletters around different themes from Construction world.

STAY CONNECTED

Advertisement

Advertisement

Advertisement

Talk to us?