+
Odisha Orders Upload Of Project Data To PM GatiShakti
ECONOMY & POLICY

Odisha Orders Upload Of Project Data To PM GatiShakti

The Odisha government has directed major infrastructure departments to upload existing project data on the Prime Minister GatiShakti National Master Plan (PMGS-NMP) portal by the end of July. The Planning and Convergence department (P&C department) will act as nodal department and the Odisha Industrial Infrastructure Development Corporation (IDCO) will continue as nodal agency for coordination and technical support. The move is intended to expedite integrated infrastructure planning.

The revised framework, approved after high-level meetings with the concurrence of Chief Minister Mohan Charan Majhi, provides for a dedicated PM GatiShakti cell in the P&C department. It will be supported by officials from IDCO, the Odisha Space Applications Centre (ORSAC) and technical experts from the Bhaskaracharya National Institute for Space Applications and Geo-informatics (BISAG-N). BISAG-N will deploy resource persons to assist departments with data onboarding and portal operations.

In the first phase, Works, Rural Development, Panchayati Raj and Drinking Water, Housing and Urban Development, Energy, Commerce and Transport and Water Resources have been asked to upload legacy project data. Revenue and Disaster Management and Forest, Environment and Climate Change will onboard land and forest datasets to aid integrated planning. Departments with their own monitoring platforms must integrate them with the PMGS-NMP portal through application programming interfaces and nominate nodal officers.

The government has decided to integrate the Works and Accounts Management Information System (WAMIS) with the PMGS-NMP platform to enable synchronised planning, and Works, Rural Development, Housing and Urban Development and IDCO have been tasked to complete the integration within a time bound schedule. IDCO will organise a state level workshop for approvers, data managers and users, while BISAG-N will present the platform's planning and decision support capabilities to senior officials. Progress will be reviewed monthly under the chairmanship of the development commissioner and will move to a quarterly cycle once the system stabilises. At district level, assistant directors (planning) of district planning and monitoring units will act as district nodal officers to coordinate implementation starting with aspirational districts and later across the state.

The Odisha government has directed major infrastructure departments to upload existing project data on the Prime Minister GatiShakti National Master Plan (PMGS-NMP) portal by the end of July. The Planning and Convergence department (P&C department) will act as nodal department and the Odisha Industrial Infrastructure Development Corporation (IDCO) will continue as nodal agency for coordination and technical support. The move is intended to expedite integrated infrastructure planning. The revised framework, approved after high-level meetings with the concurrence of Chief Minister Mohan Charan Majhi, provides for a dedicated PM GatiShakti cell in the P&C department. It will be supported by officials from IDCO, the Odisha Space Applications Centre (ORSAC) and technical experts from the Bhaskaracharya National Institute for Space Applications and Geo-informatics (BISAG-N). BISAG-N will deploy resource persons to assist departments with data onboarding and portal operations. In the first phase, Works, Rural Development, Panchayati Raj and Drinking Water, Housing and Urban Development, Energy, Commerce and Transport and Water Resources have been asked to upload legacy project data. Revenue and Disaster Management and Forest, Environment and Climate Change will onboard land and forest datasets to aid integrated planning. Departments with their own monitoring platforms must integrate them with the PMGS-NMP portal through application programming interfaces and nominate nodal officers. The government has decided to integrate the Works and Accounts Management Information System (WAMIS) with the PMGS-NMP platform to enable synchronised planning, and Works, Rural Development, Housing and Urban Development and IDCO have been tasked to complete the integration within a time bound schedule. IDCO will organise a state level workshop for approvers, data managers and users, while BISAG-N will present the platform's planning and decision support capabilities to senior officials. Progress will be reviewed monthly under the chairmanship of the development commissioner and will move to a quarterly cycle once the system stabilises. At district level, assistant directors (planning) of district planning and monitoring units will act as district nodal officers to coordinate implementation starting with aspirational districts and later across the state.

Related Stories

Gold Stories

Next Story
Equipment

InfraServe Global Launches Five Products at bauma CONEXPO India

InfraServe Global (ISG), part of the Gainwell Group, made its debut at bauma CONEXPO India 2026 with the launch of five products for road maintenance, asphalt applications, concrete pumping and mastic heating.The company unveiled the Etnyre RoadSaver, Etnyre Asphalt Distributor (Black-Topper® Centennial), Etnyre Mastic Kettle and its 50 m³ and 70 m³ concrete pumps at its booth at the India Expo Centre, Greater Noida. The launches support ISG’s strategy of developing equipment in India for domestic as well as international markets.The Etnyre RoadSaver is designed to improve slurry sealing ..

Next Story
Equipment

JEHEL Showcases Hydraulic Material Handling Solutions at bauma 2026

Jaypee Engineering & Hydraulic Equipment Co. Ltd. (JEHEL) showcased its hydraulic material handling equipment portfolio at BAUMA CONEXPO INDIA 2026, held from September 15-18 at the India Expo Centre, Greater Noida.The company participated at Hall H11, Stall K15, alongside sister concern Vishnu Forge Industries Limited (VFIL), which specialises in forged and machined parts and assemblies.Founded in 1995, JEHEL provides hydraulic material handling equipment for sectors including cement, steel and sponge iron, glass, construction, sugar, paper and railways.At the exhibition, the company disp..

Next Story
Equipment

TORSA Machines Targets Rs 5 Bn Revenue in Five Years

TORSA Machines Limited, an Indian manufacturer of crushing and screening equipment, is targeting a Rs 5-billion business over the next five years as it expands its technology portfolio, manufacturing capacity and market presence.The company is showcasing its expanded equipment portfolio at bauma CONEXPO INDIA 2026, being held from September 15-18 at the India Expo Centre in Greater Noida. Its display includes new crushing, screening, shaping and sand-processing solutions alongside its established equipment range.Gopi Krishna More, Managing Director, TORSA Machines, said the five-year target re..

Advertisement

Subscribe to Our Newsletter

Get daily newsletters around different themes from Construction world.

STAY CONNECTED

Advertisement

SPECIAL OFFER
QR Code