KPCL Steps Up Thermal Generation To Offset Hydropower Decline
POWER & RENEWABLE ENERGY

KPCL Steps Up Thermal Generation To Offset Hydropower Decline

Karnataka Power Corporation Limited (KPCL) has increased thermal power generation to ensure adequate and reliable electricity supply across the state amid a decline in hydropower generation caused by deficient rainfall. The corporation said it is generating an average of 84.34 million units (mn units) of thermal power every day in July and is taking measures to further increase daily generation to 100 mn units in the coming days. It has been maintaining its thermal plants in optimal operating condition and is undertaking proactive steps to augment output while also bolstering coal stocks.

Energy minister K J George has reviewed KPCL’s generation activities and directed officials to ensure generation meets demand and plant availability is maximised. The corporation said steps are being taken to achieve full availability of thermal units and to reach the 100 mn units daily target. It noted that a shortfall in hydropower output may necessitate electricity purchases from other states, which would place an additional burden on the State exchequer, and that increased in?state generation is intended to avoid such costs.

The KPCL reported that coal supplies and thermal generation have risen markedly during the monsoon, particularly in July. At the Raichur Thermal Power Station an average of 24.45 mn units per day is being generated in July this year compared with 13.12 mn units per day during July last year. At the Ballari Thermal Power Station average daily output has risen to 33.64 mn units from 25.35 mn units, while at the Yermarus station daily generation has increased to 26.25 mn units from 16 mn units during the corresponding period last year.

KPCL said coal stocks sufficient for 15 days of operation have been maintained and arrangements are being made to raise stocks to a level sufficient for 20 days by receiving 17-18 coal rakes per day. During the corresponding period last year coal stocks had been sufficient for 12 days, and the corporation said the enhanced stock levels and plant readiness will support higher thermal generation to meet demand.

Karnataka Power Corporation Limited (KPCL) has increased thermal power generation to ensure adequate and reliable electricity supply across the state amid a decline in hydropower generation caused by deficient rainfall. The corporation said it is generating an average of 84.34 million units (mn units) of thermal power every day in July and is taking measures to further increase daily generation to 100 mn units in the coming days. It has been maintaining its thermal plants in optimal operating condition and is undertaking proactive steps to augment output while also bolstering coal stocks. Energy minister K J George has reviewed KPCL’s generation activities and directed officials to ensure generation meets demand and plant availability is maximised. The corporation said steps are being taken to achieve full availability of thermal units and to reach the 100 mn units daily target. It noted that a shortfall in hydropower output may necessitate electricity purchases from other states, which would place an additional burden on the State exchequer, and that increased in?state generation is intended to avoid such costs. The KPCL reported that coal supplies and thermal generation have risen markedly during the monsoon, particularly in July. At the Raichur Thermal Power Station an average of 24.45 mn units per day is being generated in July this year compared with 13.12 mn units per day during July last year. At the Ballari Thermal Power Station average daily output has risen to 33.64 mn units from 25.35 mn units, while at the Yermarus station daily generation has increased to 26.25 mn units from 16 mn units during the corresponding period last year. KPCL said coal stocks sufficient for 15 days of operation have been maintained and arrangements are being made to raise stocks to a level sufficient for 20 days by receiving 17-18 coal rakes per day. During the corresponding period last year coal stocks had been sufficient for 12 days, and the corporation said the enhanced stock levels and plant readiness will support higher thermal generation to meet demand.

Next Story
Infrastructure Urban

AI Powered Security Robot To Debut At Puri Station

The East Coast Railway (ECoR) has unveiled an artificial intelligence powered robotic surveillance platform that will be deployed at Puri railway station ahead of Lord Jagannath's Bahuda Yatra on 24 July to enhance passenger safety and security. The platform, named DSC ARJUN, was revealed in the presence of ECoR General Manager Parmeshwar Funkwal and senior railway and Railway Protection Force (RPF) officers. ECoR officials said the system has been introduced as a temporary deployment for the festival and may later be shifted to Bhubaneswar railway station. Developed to support Railway Protect..

Next Story
Infrastructure Urban

India Eases RCMC Rule For Low Value Exports

The Directorate General of Foreign Trade (DGFT) has proposed exempting low value export consignments from the requirement to hold a registration-cum-membership certificate (RCMC), in a move intended to simplify compliance for small exporters. The proposal targets shipments with a free-on-board value of up to Rs 10,000 and seeks to reduce paperwork for first time exporters and micro, small and medium enterprises. The announcement forms part of a wider government effort to encourage exports through online platforms and emerging delivery channels. Under the proposed amendment to Paragraph 2.57 of..

Next Story
Infrastructure Urban

Assam Launches Centre Of Excellence For Additive Manufacturing

The Assam government has inaugurated a Digital Design and additive manufacturing centre of excellence in Guwahati, signalling a push towards technology driven manufacturing across the state. Chief Minister Himanta Biswa Sarma opened the facility and outlined its intended role in fostering innovation, product development and entrepreneurship. The centre will provide industries, startups and researchers with access to advanced digital manufacturing tools and additive manufacturing capabilities. Officials said the facility aims to strengthen the state innovation ecosystem and reduce dependence on..

Advertisement

Subscribe to Our Newsletter

Get daily newsletters around different themes from Construction world.

STAY CONNECTED

Advertisement

Advertisement

Advertisement