Telangana Gets 191-km Four-Lane Highway Boost
ROADS & HIGHWAYS

Telangana Gets 191-km Four-Lane Highway Boost

The Cabinet Committee on Economic Affairs, chaired by the Prime Minister, approved the widening of the Armoor?Jagtial?Mancherial section of National Highway?63 and the Jagtial?Karimnagar section of National Highway?563 to four?lane standards. The combined capital cost was sanctioned at Rs 75.97 billion (bn), covering a total project length of 190.76 km. The sanction was cleared to be implemented in three separate packages.

The Armoor?Jagtial stretch of 63.6 km and the Jagtial?Mancherial stretch of 68.295 km on NH?63 will be developed under the Hybrid Annuity Model, while the 58.866 km Jagtial?Karimnagar section will proceed on a Build?Operate?Transfer toll basis. The packages include significant greenfield realignments and bypasses to reduce congestion in built?up areas. Construction and operation timelines were outlined by officials.

The corridors traverse Nizamabad, Jagtial, Mancherial and Karimnagar districts and pass through urban stretches such as Anksapoor, Korutla, Dharmapuri, Lakshettipet, Potharam and Gangadhara, where traffic density is high. The works will adopt an open?tolling system and a design speed of 100 kmph to improve movement and safety along the routes. Officials said the upgrades will strengthen multimodal connectivity with nearby railway stations.

The upgraded corridors are expected to link five economic nodes, seven social nodes and 10 logistics nodes, connecting Special Economic Zones at Siddipet and Warangal Urban, Mega Food Parks at Nizamabad and Siddipet, and the Fishing and Seafood Cluster at Rajanna Sircilla. Social and tourism destinations that will gain improved access include Vemulawada, Kondagattu, Nagunur Fort, Lower Manair Dam and Quila Fort. This is intended to spur regional development.

Official estimates indicate travel time between Armoor and Mancherial will be shorter by around one hour and 30 minutes and that the Jagtial to Karimnagar journey will be reduced by nearly 45 minutes, while fuel consumption, carbon emissions and vehicle operating costs should decline. The projects are projected to generate 3.443 million (mn) direct man?days and 4.27 mn indirect man?days during construction and operation. Traffic counts recorded Annual Average Daily Traffic at 14,949 PCUs on Armoor?Jagtial, 12,084 PCUs on Jagtial?Mancherial and 20,446 PCUs on Jagtial?Karimnagar in 2024?25.

The Cabinet Committee on Economic Affairs, chaired by the Prime Minister, approved the widening of the Armoor?Jagtial?Mancherial section of National Highway?63 and the Jagtial?Karimnagar section of National Highway?563 to four?lane standards. The combined capital cost was sanctioned at Rs 75.97 billion (bn), covering a total project length of 190.76 km. The sanction was cleared to be implemented in three separate packages. The Armoor?Jagtial stretch of 63.6 km and the Jagtial?Mancherial stretch of 68.295 km on NH?63 will be developed under the Hybrid Annuity Model, while the 58.866 km Jagtial?Karimnagar section will proceed on a Build?Operate?Transfer toll basis. The packages include significant greenfield realignments and bypasses to reduce congestion in built?up areas. Construction and operation timelines were outlined by officials. The corridors traverse Nizamabad, Jagtial, Mancherial and Karimnagar districts and pass through urban stretches such as Anksapoor, Korutla, Dharmapuri, Lakshettipet, Potharam and Gangadhara, where traffic density is high. The works will adopt an open?tolling system and a design speed of 100 kmph to improve movement and safety along the routes. Officials said the upgrades will strengthen multimodal connectivity with nearby railway stations. The upgraded corridors are expected to link five economic nodes, seven social nodes and 10 logistics nodes, connecting Special Economic Zones at Siddipet and Warangal Urban, Mega Food Parks at Nizamabad and Siddipet, and the Fishing and Seafood Cluster at Rajanna Sircilla. Social and tourism destinations that will gain improved access include Vemulawada, Kondagattu, Nagunur Fort, Lower Manair Dam and Quila Fort. This is intended to spur regional development. Official estimates indicate travel time between Armoor and Mancherial will be shorter by around one hour and 30 minutes and that the Jagtial to Karimnagar journey will be reduced by nearly 45 minutes, while fuel consumption, carbon emissions and vehicle operating costs should decline. The projects are projected to generate 3.443 million (mn) direct man?days and 4.27 mn indirect man?days during construction and operation. Traffic counts recorded Annual Average Daily Traffic at 14,949 PCUs on Armoor?Jagtial, 12,084 PCUs on Jagtial?Mancherial and 20,446 PCUs on Jagtial?Karimnagar in 2024?25.

Related Stories

Gold Stories

Next Story
Infrastructure Urban

KONE Opens India's First Digital Experience Centre in Pune

KONE, a global elevator and escalator manufacturer, has inaugurated its first Digital Experience Centre (DEC) in India, located in Pune. The facility aims to showcase how artificial intelligence (AI), connectivity and data-driven technologies can enhance customer experiences and improve building operations.The centre was inaugurated by Jussi Herlin, Executive Vice Chair, KONE Corporation; Philippe Delorme, President and CEO, KONE; and Nandan Nilekani, Co-founder and Chairman of the Board, Infosys.Designed as an interactive customer environment, the facility demonstrates digital solutions cover..

Next Story
Infrastructure Urban

CII GreenCo Launches Circularity Guidelines for Indian Industry

The Confederation of Indian Industry (CII) GreenCo Council has launched the CII GreenCo Circularity Guidelines – Pilot Version at the 17th CII GreenCo Waste & Resource Management Summit 2026 in Chennai. The initiative aims to strengthen resource efficiency, waste reduction and circular economy practices across Indian manufacturing and process industries.The guidelines introduce a structured framework with circularity indices covering raw materials, consumables, packaging and other resource inputs. These indicators will help industries assess existing practices, identify opportunities to ..

Next Story
Infrastructure Energy

Global Electronics Association Launches IPC-1783-CO2E Standard

The Global Electronics Association has introduced IPC-1783-CO2E, a new international standard aimed at improving consistency, transparency and comparability in product carbon footprint reporting across the electronics manufacturing industry.The standard, titled International Standard for Data Collection and Reporting of CO2 Equivalent (CO2e) Emissions for the Electronics Manufacturing Supply Chain, provides industry-specific guidance for collecting, estimating and reporting carbon emissions data.With increasing regulatory requirements and customer expectations, electronics manufacturers face c..

Advertisement

Subscribe to Our Newsletter

Get daily newsletters around different themes from Construction world.

STAY CONNECTED

Advertisement

SPECIAL OFFER
QR Code